Removing the Needle from the Cartridge
- Prepare: Ensure the turntable is powered off and unplugged for safety.
- Position: Place a small screwdriver at the tip of the stylus (needle).
- Push Downward: Gently push the screwdriver downward, as indicated by direction "A" in the diagram.
- Pull Forward: Carefully remove the stylus by pulling it forward and pushing downward.
Installing the Stylus
- Prepare: Hold the new stylus by its tip.
- Insert: Insert the stylus into the cartridge, pressing as indicated by direction "B" in the diagram.
- Lock into Place: Push the stylus upward, as shown by direction "C", until it locks securely into position.
Tips
- Handle the stylus with care to avoid damaging the delicate components.
- Ensure the stylus is properly aligned and securely locked to prevent any playback issues.
- If you encounter any difficulties, refer to the user manual or contact our customer support for assistance.
By following these steps, you can ensure your turntable is equipped with a properly installed cartridge for the best audio performance.