Thank you for choosing the Gemini GTT-5000 Modern Classic Belt Drive USB Turntable Pack, complete with a pair of speakers. To optimize your turntable setup and make the most out of your vinyl record collection, we recommend adhering to the following instructions:

• Belt Installation
  • You'll find the turntable belt beneath the platter. Gently take it out.
  • Align the belt with the motor pulley by positioning the platter on the spindle.
  • Extend the belt over the motor pulley, ensuring it is neither twisted nor slack.

• Headshell Installation
  • Secure the needle/cartridge to the headshell using the provided screws.
  • Affix the headshell to the tonearm and ensure it's firmly locked.
  • Fine-tune the balance of the tonearm by adjusting both the counterweight and the anti-skating dial as per the manual's instructions.

• Setting Up Connections
  • Plug the active speaker into a power outlet and turn it on.
  • Utilize the supplied speaker wire to connect the passive speaker to the active one.
  • Use the provided RCA cables to link the turntable to the active speaker. Make certain the plugs and jacks' colors correspond.
  • If you wish to digitize your records' audio, connect the USB cable from the turntable to your computer. (Remember, the turntable comes with an in-built soundcard capable of transforming analog signals into digital files. It may be necessary to install a software program like Audacity to capture audio from your computer.)

Enjoy Your Music!

Your setup is complete! You're all set to spin your records and relish in the high-quality sound. For more detailed guidance, consult the manual or browse through our website.