Introduction
If you're looking to expand your audio setup with multiple GHSI-W525BT outdoor speaker sets, this guide will walk you through the process of daisy chaining up to four speakers to ensure they all play simultaneously.
What You Need
- Two Pairs of GHSI Series Speakers: Purchase two sets to have a total of four speakers.
- 1/8-inch AUX Cable: Ensure the cable is long enough to connect the speakers in your intended setup.
- Power Outlets: Sufficient power sources for each active speaker.
Step-by-Step Guide
- Unbox Your Speakers: Start by unboxing all four GHSI Series speakers.
-
Connect the First Pair:
- Connect the active speaker to the passive speaker in the first set using the included speaker wire.
-
Set Up for Daisy Chaining:
- Use the auxiliary output on the first pair’s active speaker to connect to the auxiliary input of the second pair’s active speaker with the 1/8-inch cable.
-
Repeat for Additional Pairs:
- If you have more than one additional pair, repeat the above step, connecting each pair sequentially using the auxiliary output and input.
-
Power the Speakers:
- Plug in each active speaker to a power source. All active speakers must be powered for the setup to work correctly.
-
Test the Setup:
- Play audio through the system to ensure all speakers are functioning and playing simultaneously.
Tips for Best Performance
- Cable Management: Keep cables organized to avoid tangling and potential damage.
- Speaker Placement: Place speakers strategically to cover the desired area evenly.
- Power Considerations: Ensure you have enough power outlets or use a power strip with surge protection for safety.
Troubleshooting
- No Sound from All Speakers: Check all power connections and ensure each active speaker is plugged in.
- Uneven Sound: Verify all connections and ensure the 1/8-inch cables are securely connected.
For further assistance or more detailed support, please contact our customer service team.