[CDMP-7000, CDJ-700] Updating Firmware

Follow

Comments

11 comments

  • rfmmusic

    I have gemini cmp7000
    I want to connect to serato dj with pioneer ddj-sp1
    But is no possible on serato
    I want to know which model SL audio interface need

    0
    Comment actions Permalink
  • David

    Hello! 

    To use the CDMP-7000 with Serato you need to use any 2 channel serato box.

    That means the Rane SL2, SL3, SL4 or the Denon DS1. 

    You can then use the time code to control Serato and use the SP1 as your controller for all those extra features. 

    0
    Comment actions Permalink
  • Erik Baumgarten

    Ich bekomme das Update nicht auf meinen CDJ 700 gespielt auch nicht das Neue Update 4.5 kein plan warum habe die Mac software auch Runter Geladen und er macht das Update einfach nicht.An was kann es den Liegen oder wie Sätze ich den CDJ wieder zurück.Und die Download Links gehen auch nicht mehr auf euer Webseite.

     

    Besten dank Erik

    0
    Comment actions Permalink
  • Bernard Eatmon

    How do I link my Gemini CDMP-7000 to Virtual DJ

     

    0
    Comment actions Permalink
  • Matthew Kenney

    For anyone else trying to update the firmware on their CDJ-700 to the latest version (4.7 as of writing) from a version prior to 4.4, you need to follow the above article's instructions first of upgrading to 4.4:

    download cdmpnext_update_4.4.gci,

    place on a usb drive,

    insert usb drive into cdj-700

    then browse to the usb drive

    the cdj700 will recognize it and then allow you to choose the file and update.

    This will bring your cdj-700 to 4.4

    THEN you can use the Gemini Updater application to bring your v4.4 CDJ up to the latest version. Follow the instructions under "Downloads", "Firmware Updates" here:

    http://geminisound.com/product/cdj-700

    If you aren't at 4.4 already, Gemini Updater won't work. Wish Gemini would have made this clearer and I hope this saves someone a few hours!

     

     

    0
    Comment actions Permalink
  • Arvid Cederberg

    I am trying to update my CDJ 700 to the latest firmware (have 4.4 now), but it freezes when ”transfer: in progress” is almost done. Have waited for a few hours..

    Any suggestions?

    0
    Comment actions Permalink
  • Matthew Kenney

    Arvid, gemini support is very helpful, if you haven't yet reached out to them

    https://geminisupport.zendesk.com/hc/en-us/requests/new

    You can request a cdj-700 firmware file from them to try to update via flash drive. Maybe that would work.

    0
    Comment actions Permalink
  • Arvid Cederberg

    Thanks Matthew, I will check if they can send me a gci file :)

    2
    Comment actions Permalink
  • Alexandr Khantil

    Launched gemini update 11, but he writes message "problems with connecting to the Internet"

    Launched Gemini Update 14, he wrotes that there is a new version 4.7. I agreed with the update and clicked button "Update firmware". Shows a message about the successful update and the need to turn power OFF/ON. Version remained 4.4.

    Share the firmware for USB above 4.4

    0
    Comment actions Permalink
  • Felipe Galindo
    effectively, it does not work properly.
    I have two CDJ-700, a CDJ with version 4.4 and another with 4.3
    and only the CDJ that has version 4.4 can be updated by software, bu
    GEMINI UPDATER version 14 software says it installs it correctly,
    but it does not work.

    The CDJ version 4.3 does not work with the GEMINI UPDATER version 14.
    0
    Comment actions Permalink
  • Felipe Galindo

    Hi chicos.

    Eric of Gemini support, he sent me the firmware 4.7. I share it with you.

    Send me an email: fagalindogonzalez@gmail.com

    0
    Comment actions Permalink

Please sign in to leave a comment.