AGC (Automatic Gain Control) ON/OFF
- Hold the stop button for a few seconds in RECORD mode.
Backlight ON/OFF
- Press PLAY button in select device mode.
NOISE GATE ON/OFF
- Press and hold record in select device mode.
PLAY ALL/PLAY SINGLE
- Hold the PLAY button in playback mode
- Hold again to deactivate and return to PLAY SINGLE
Comments
6 comments
This awesome, as the noise gate was ruining my recordings, but how do we get to "select device mode?" That's not in the manual either.
I turned the noise gate off by turning the unit off removing the SD card and anything connected to the USB port. pushed and held thethe record button and it turned off.. I'm not sure what purpose the noise gate serves, but turning it off solved the problem with drop outs in my recordings!
The time stamp on my recordings is wrong and I can't find a way to correct it. The manual completely ignors the subject. It is very important to the purpose we use it for, does anyone know how to do this?
How do you set the Date and Time for legal reasons?
I use this recorder to archive recordings. If the timestamp doesn't work correctly then this is a huge problem! How do I make this thing work correctly? The manual does not address this issue.
If it is impossible to have the recorder time stamp correctly, please let me know! Thanks
when i go into record more the display box is in red with the recording levels right up, I've turned the wheel but nothing happens, any ideas please
Please sign in to leave a comment.